Photographica Pages
An online guide to collectable cameras and related stuff
Tele-Rollei (Tele Rolleiflex)
The Tele Rolleiflex, known to most collectors as the Tele-Rollei, was
introduced in 1961. The Tele-Rollei, and it’s companion, the Rolleiwide were
marketed in response to those wishing for Rolleiflex cameras with
interchangeable lenses. Rollei had been pursuing a design with an
interchangeable lens board, but the cost was so high that it was simpler to
offer cameras with fixed wide and telephoto lenses.
The Tele-Rollei is based on the same body as the Rolleiflex E series. It is
fitted with a 135/4 Zeiss Sonnar taking lens, and a 1355/4 Heidosmat viewing
lens. The
viewing hood is removable, and is unique. The sportsfinder in the hood has a
field of view matching that of the 135 Sonnar.
The Tele-Rollei uses Bayonet III size accessories, but requires a different
set of Rolleinars unique to this model. There is a Rolleinar 0.35x which
allows focusing from 4' 5" (1.33m) to 9' (2.74m), and swings out of the way
allowing you to leave it on the camera when focusing beyond 9'. This Rolleinar
is particularly useful for portraiture work as the camera does not quite focus
close enough without it for a head shot. There is also a Rolleinar 0.7x which
allows focus from 3' (0.91m) to 4' 6.5". As there would be a gap in
focus distance with the Rolleinar mounted and removed, it was not built in the
swinging style like the 0.35x.
There are two distinct types of Tele-Rollei, the type 1 and type 2. The type
2 does not replace the type 1, but was sold concurrently with the type 1 after
1970. The type 2 accepts 220 film, while the type 1 does not. The finder is also
supposed to be different between the two models, the type 2 having an open area
around the frame allowing you to see what is happening outside the image area. I
suspect that type 1 cameras built after 1970 have the later style finder. The
camera pictured is a type 1 with a late serial number, and it has the later
style finder. Finders do get switched over the years (they are removable), so
it's possible that the finder on this camera was replaced with one off of a type
2.
Serial numbers run from 2,300,000 through 2,304,999 for the type 1, and
2,305,000 through 2,308,377 for the type 2. This would indicate a production run of
8377 units. The serial number list from Rollei doesn't always seem to be as
accurate as it seems. We've had many cameras that were outside the serial number
range indicated. The example shown is serial number 2305265, which would
indicate it was a type 2. I would not be surprised if type 1 cameras were
assembled in small batches using type 2 serial numbers after 1970. Production was ended in
1975. Cost in 1961 was $399.50, compared
with $336 or $349 for the Rolleiflex 2.8F with Xenotar or Planar respectively.
By 1975 the cost had risen to $940 for the type 1 and $988 for the type 2. I
suspect not too many type 1 cameras were sold after the introduction of the type
2 as the difference in price was relatively slight.
The Tele-Rollei Type 1 with exposure meter added.
The later style viewing hood, with the sportsfinder open.
The special Rolleinars for the Tele-Rollei, the 0.35x (left)
and the 0.7x (right).
The 0.7x Rolleinar mounted on the camera.
The 0.35x Rolleinar mounted on the camera.
Another picture of the 0.35x, swung out of the way, allowing focus from 4' to infinity without removing
the Rolleinar from the camera.
The 03.5x Rolleinar with it's soft plastic case.
The Tele-Rollei Type 1 with exposure meter added.
The later style viewing hood, with the sportsfinder open.
The special Rolleinars for the Tele-Rollei, the 0.35x (left)
and the 0.7x (right).
The 0.7x Rolleinar mounted on the camera.
The 0.35x Rolleinar mounted on the camera.
Another picture of the 0.35x, swung out of the way, allowing focus from 4' to infinity without removing
the Rolleinar from the camera.
The 03.5x Rolleinar with it's soft plastic case.